中文版

YKA round block hole type graphite heat exchanger
【Structure and characteristics】
The use of this equipment, the head of graphite, heat exchanger unit block stacking structure of graphite block drilling in the two groups do not have the same flow channel, and at right angles between these two groups, two different fluid flow through these two groups to achieve the purpose of heat exchange. Heat transfer between the use of PTFE block "O"-rings or expansion of PTFE (PTFE flexible rope) sealed the overall installation of the pressure spring device for automatic compensationExpand with heat and contract with cold institutions.
【Technical characteristics】
Design temperature: -40 ~ 180 ℃
Design pressure: 0.4MPa
Heat transfer area: 1 ~ 200 m²
According to user needs the design, manufacture design pressure 0.7MPa, temperature 200 ℃ the design of the equipment, can also design and manufacture of heat exchangers for more than 200m².
The implementation of standards: reference HG/T3113-1998 "YKA block round hole type graphite heat exchanger,"
【The main advantage】
1) graphite cell block design, the block was damaged the rapid replacement of
2) the use of gaskets between the graphite block, do not tackifier, demolition, equipment is simple, easy maintenance
3) Add a graphite block heat exchanger to increase the size of
4) impact resistance and strong
【Uses】
This series of products can be used as evaporators, heaters, coolers, condensers.